AGA LEGACY 36 Manuel de service télécharger pdf (Page 21)

SERVICING  WARNING

Disconnect from electricity before servicing. Check appliance is safe when you have finished.

15. To Change Oven Door Outer Panel

Remove the two plastic blanking plugs from the

door handles. Remove the 4mm Hex headed screws

holding the handle to the door with the hexagon key

tool. Remove two screws from top edge and two from

bottom edge of the door.

Remove outer door panel - 4 screws.

Fit door handle to new panel. Fit the plastic blanking

plugs to the ﬁ xing holes.

The handles should be above the ﬁ xings.

Fit panel to door.

If replacing the outer panel on a right hand door with

a Thermodial take care to make sure the sensor of

the Thermodial is sealed to the door by the rubber

grommet.

Reassemble in reverse order.

16 To Remove the Main Oven Door Latch

Remove the oven outer door panel as detailed in Section 18.

Remove the screws that secure the latch assembly to the inner door panel. Fit

the replacement catch and re-assemble in reverse order.

Check correct operation of door.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

AGA LEGACY 36 Manuel de service Page 21